HOME > Machine Tools HOME > Horizontal Machining Center
Horizontal Machining Center
"HU"seriesHU40A HU50A HU63A HU80A
- Box guide ways realize long term high-precision and high rigidity. Hardened box guide ways are attached to the surface which has high straightness and perpendicularity by scraping.
- The load to the column sliding section is reduced by air support for smooth high-speed feed despite the sliding method.
- Highly rigid Y-shaped integrated three-point support bed is adopted.
- Ball screws of all axes are placed in the center of the sliding surface to minimize the position difference. (In the case of standard main axis of HU63A/HU80A)
| Item | Unit | HU40A | HU50A | HU63A | HU80A | |
|---|---|---|---|---|---|---|
| Stroke | X-axis | mm | 560 | 720 | 900 | 1,200 |
| Y-axis | mm | 560 | 700 | 800 | 950 | |
| Z-axis | mm | 560 | 650 | 800 | 900 | |
| Table | Palette size | mm | 400 x 400 | 500 x 500 | 630 x 630 | 800 x 800 |
| Maximum loading weight | kg | 400 | 800 | 1,200 | 1,600 | |
| Spindle | Taper | ISO 7/24 TaperNo.40 | ISO 7/24 TaperNo.50 | |||
| Main axis rotation speed | min-1 | 80~8,000 (OP:12,000 / 20,000) |
15~6,000 (OP:12,000 / 20,000) |
|||
| Rapid feed rate | m/min | 36 | 24 | |||
| Cutting feed rate(max.) | m/min | 20 | 10 | |||
| APC | 2APC front side revolution type | 2APC front sideboxer type | ||||
| ATC | Number of tools to be stored | pcs. | 60 | |||
| Machine weight | Kg | About 10,500 | About 12,000 | About 17,000 | About 20,000 | |
OP=Option
"FH/HW"series
FH550R FH630R HW550A HW630A FH550S FH630S FH550SX FH630SX
- Box guide ways realize long term high-precision and high rigidity. Hardened box guide ways are attached to the surface which has high straightness and perpendicularity by scraping.
- Twin ball screw is adopted for driving all axes (X, Y, and Z) to realize the feed rate of 48 m/min and acceleration of 0.5 G, which is the highest in this class.
- Center trough eliminates troubles caused by cutting dust.
- In addition, HW550A/HW630A is equipped with an access door that opens wide up to the ceiling and swing type operation board that enables a user to face parallel to the workpiece in the machine for improved workability at presetting.
| Item | Unit | FH550R / HW550A | FH630R / HW630A | |
|---|---|---|---|---|
| Stroke | X-axis | mm | 750 | 1,000 |
| Y-axis | mm | FH:800 HW:850 | ||
| Z-axis | mm | 850 | ||
| Table | Palette size | mm | 550 x 550 | 630 x 630 |
| Maximum loading weight | kg | 800 | 1,000 | |
| Spindle | Taper | ISO 7/24 TaperNo.50 | ||
| Main axis rotation speed | min-1 | 50~6,000 (OP:15,000) | ||
| Rapid feed rate | m/min | 48 | ||
| Cutting feed rate(max.) | m/min | 20 | ||
| APC | 2APC front side revolution type | |||
| ATC | Number of tools to be stored | pcs. | 40 | |
| Machine weight | Kg | About 18,000 | About 20,000 | |
OP=Option
"HS"seriesHS6A HS8A
- The only machining center that realizes extremely high rigidity in this class by adopting T-shape integrated bed (HS6A X-axis standard stroke model).
- A wide variety of X-, Y-, and Z-axes strokes are available by options.
- HS8A supports quill spindle by option.
- Various special specifications are also available.
| Item | Unit | HS6A | HS8A | |
|---|---|---|---|---|
| Stroke | X-axis | mm | 1,300 (OP:1,600 / 2,000) | 1,800 (OP:2,400 / 3,000) |
| Y-axis | mm | 1,000 (OP:1,200 / 1,500) | 1,500 (OP:1,800) | |
| Z-axis | mm | 1,000 (OP:1,200 / 1,500) | 1,200 (OP:1,500) | |
| Table | Palette size | mm | 1,000 x 1,000 (OP:1,200 x 1,200) |
1,500 x 1,500 |
| Maximum loading weight | kg | 2,000 (OP:3,500 / 5,000) | 8,000 | |
| Spindle | Taper | ISO 7/24 TaperNo.50 | ||
| Main axis rotation speed | min-1 | 15~4,500 (OP:6,000 / 12,000) |
8~3,150 (OP:6,000 / 12,000) |
|
| Rapid feed rate | m/min | XY:15 Z:12 | X:7 YZ:10 | |
| Cutting feed rate(max.) | m/min | 4 | ||
| APC | Option | |||
| ATC | Number of tools to be stored | pcs. | 60 | |
| Machine weight | Kg | About 30,000 | About 35,000 | |
OP=Option
Ultra High-precision "Jidic"seriesH5D H6D
- Very thick three-point support bed and sliding surfaces of X-, Y-, and Z-axes are scraped. The supreme technique to make the machining center realizes a mother machine of the most extreme nature that can be exactly called a horizontal jig borer.
- Excellent responsiveness ensures steady operation even by the minimum moving unit of 0.1 µm.
| Item | Unit | H5D | H6D | |
|---|---|---|---|---|
| Stroke | X-axis | mm | 850 | 1,300 |
| Y-axis | mm | 700 | 900 | |
| Z-axis | mm | 750 | 900 | |
| Table | Palette size | mm | 630 x 630 | 800 x 800 |
| Maximum loading weight | kg | 1,200 | 1,600 | |
| Spindle | Taper | ISO 7/24 TaperNo.50 | ||
| Main axis rotation speed | min-1 | 50~6,000 | ||
| Rapid feed rate | m/min | 5 | ||
| Cutting feed rate(max.) | m/min | 4 | ||
| APC | Option | |||
| ATC | Number of tools to be stored | pcs. | 60 | |
| Machine weight | Kg | About 18,000 | About 21,000 | |
OP=Option